27/10

Thermal Oil Pressure Instruments: Working, Overpressure and Burst Limits

Do not treat burst or overpressure figures as working pressure. Review range, or…

26/10

Thermal Oil Instrument Connections: Thread and Seal Checklist

Matching nominal sizes do not prove thread compatibility. Check both end connect…

23/10

Thermal Oil DSC Specific Heat Reports: A Design-Input Checklist

Can a DSC specific heat report support thermal oil design? Check sample stabilit…

22/10

Thermal Oil Pressure Measurement: Remote Diaphragm Seal Checklist

A remote diaphragm seal does not eliminate temperature effects. Check fill fluid…

21/10

Thermal Oil Flow Meters: Comparing t/h and m³/h

Compare thermal oil mass and volume flow by checking density at the relevant sta…

20/10

How to Compare FTIR Oxidation Trends in Thermal Oil

Compare thermal oil FTIR oxidation trends by checking reference-fluid identity, …

16/10

Can a Water Pump Curve Be Used for Thermal Oil? Viscosity Corrections Explained

Can a water pump curve be used for thermal oil? Learn how to distinguish water c…

15/10

Can a Thermal Stability Test Prove Heat Transfer Fluid Service Life?

Can a thermal stability test prove heat transfer fluid service life? Review ASTM…

13/10

Thermal Oil Filters: Micron Ratings and Beta Ratios

Two 10-micron filters may perform differently. Compare beta ratios, test conditi…

09/10

Thermal Oil Pump Noise: Is It Cavitation?

Pump noise, vibration and falling flow do not prove cavitation. Review suction c…

07/10

Heat Transfer Fluid Selection After Project Changes

Review heat transfer fluid selection after project changes. Track revised requir…

04/10

How to Verify a Thermal Fluid Supplier’s Testing Capability

Check who performs each thermal fluid test, which methods and samples are covere…